ApWiredUplinkInfo
Properties
| Name | Type | Description | Notes |
|---|---|---|---|
| Activity | Pointer to int64 | (Change of( downBytes+upBytes))/ time, Unit: Bytes/s | [optional] |
| Current | Pointer to float64 | Current, only supported by some devices. | [optional] |
| DownBytes | Pointer to int64 | Unit: Byte | [optional] |
| DownDropPackets | Pointer to int64 | Uplink Device downDropPackets | [optional] |
| DownErrorsPackets | Pointer to int64 | Uplink Device downErrorsPackets | [optional] |
| DownPackets | Pointer to int64 | Uplink Device downPackets | [optional] |
| Duplex | Pointer to int32 | Duplex should be a value as follows: 0: LAN disconnected; 1: half; 2: full | [optional] |
| Ip | Pointer to string | Uplink device ip. | [optional] |
| LinkSpeed | Pointer to int32 | Uplink port link speed | [optional] |
| LinkStatus | Pointer to int32 | Uplink port link status | [optional] |
| Model | Pointer to string | Uplink device model | [optional] |
| ModelVersion | Pointer to string | Uplink device modelVersion | [optional] |
| Name | Pointer to string | Uplink device name | [optional] |
| Port | Pointer to string | Uplink port ID, only supported by some devices. | [optional] |
| PortType | Pointer to int32 | Port Type, 0:ETH, 1:POTS, 2:SFP | [optional] |
| Rate | Pointer to string | Negotiation rate, LAN(connected): 10,100,1000,2500,10000, LAN(disconnected):0, Unit:Mbps | [optional] |
| RxPower | Pointer to float64 | Rx Power, only supported by some devices. | [optional] |
| StackId | Pointer to string | [optional] | |
| Temp | Pointer to float64 | Temperature, only supported by some devices. | [optional] |
| TxPower | Pointer to float64 | Tx power, only supported by some devices. | [optional] |
| Type | Pointer to string | Uplink device type | [optional] |
| UpBytes | Pointer to int64 | Unit: Byte | [optional] |
| UpDropPackets | Pointer to int64 | Uplink Device upDropPackets | [optional] |
| UpErrorsPackets | Pointer to int64 | Uplink Device upErrorsPackets | [optional] |
| UpPackets | Pointer to int64 | Uplink Device upPackets | [optional] |
| UplinkMac | Pointer to string | Uplink device MAC address | [optional] |
| UplinkPort | Pointer to string | Uplink device port | [optional] |
| Voltage | Pointer to float64 | Voltage, only supported by some devices. | [optional] |
Methods
NewApWiredUplinkInfo
func NewApWiredUplinkInfo() *ApWiredUplinkInfo
NewApWiredUplinkInfo instantiates a new ApWiredUplinkInfo object This constructor will assign default values to properties that have it defined, and makes sure properties required by API are set, but the set of arguments will change when the set of required properties is changed
NewApWiredUplinkInfoWithDefaults
func NewApWiredUplinkInfoWithDefaults() *ApWiredUplinkInfo
NewApWiredUplinkInfoWithDefaults instantiates a new ApWiredUplinkInfo object This constructor will only assign default values to properties that have it defined, but it doesn't guarantee that properties required by API are set
GetActivity
func (o *ApWiredUplinkInfo) GetActivity() int64
GetActivity returns the Activity field if non-nil, zero value otherwise.
GetActivityOk
func (o *ApWiredUplinkInfo) GetActivityOk() (*int64, bool)
GetActivityOk returns a tuple with the Activity field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetActivity
func (o *ApWiredUplinkInfo) SetActivity(v int64)
SetActivity sets Activity field to given value.
HasActivity
func (o *ApWiredUplinkInfo) HasActivity() bool
HasActivity returns a boolean if a field has been set.
GetCurrent
func (o *ApWiredUplinkInfo) GetCurrent() float64
GetCurrent returns the Current field if non-nil, zero value otherwise.
GetCurrentOk
func (o *ApWiredUplinkInfo) GetCurrentOk() (*float64, bool)
GetCurrentOk returns a tuple with the Current field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetCurrent
func (o *ApWiredUplinkInfo) SetCurrent(v float64)
SetCurrent sets Current field to given value.
HasCurrent
func (o *ApWiredUplinkInfo) HasCurrent() bool
HasCurrent returns a boolean if a field has been set.
GetDownBytes
func (o *ApWiredUplinkInfo) GetDownBytes() int64
GetDownBytes returns the DownBytes field if non-nil, zero value otherwise.
GetDownBytesOk
func (o *ApWiredUplinkInfo) GetDownBytesOk() (*int64, bool)
GetDownBytesOk returns a tuple with the DownBytes field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetDownBytes
func (o *ApWiredUplinkInfo) SetDownBytes(v int64)
SetDownBytes sets DownBytes field to given value.
HasDownBytes
func (o *ApWiredUplinkInfo) HasDownBytes() bool
HasDownBytes returns a boolean if a field has been set.
GetDownDropPackets
func (o *ApWiredUplinkInfo) GetDownDropPackets() int64
GetDownDropPackets returns the DownDropPackets field if non-nil, zero value otherwise.
GetDownDropPacketsOk
func (o *ApWiredUplinkInfo) GetDownDropPacketsOk() (*int64, bool)
GetDownDropPacketsOk returns a tuple with the DownDropPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetDownDropPackets
func (o *ApWiredUplinkInfo) SetDownDropPackets(v int64)
SetDownDropPackets sets DownDropPackets field to given value.
HasDownDropPackets
func (o *ApWiredUplinkInfo) HasDownDropPackets() bool
HasDownDropPackets returns a boolean if a field has been set.
GetDownErrorsPackets
func (o *ApWiredUplinkInfo) GetDownErrorsPackets() int64
GetDownErrorsPackets returns the DownErrorsPackets field if non-nil, zero value otherwise.
GetDownErrorsPacketsOk
func (o *ApWiredUplinkInfo) GetDownErrorsPacketsOk() (*int64, bool)
GetDownErrorsPacketsOk returns a tuple with the DownErrorsPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetDownErrorsPackets
func (o *ApWiredUplinkInfo) SetDownErrorsPackets(v int64)
SetDownErrorsPackets sets DownErrorsPackets field to given value.
HasDownErrorsPackets
func (o *ApWiredUplinkInfo) HasDownErrorsPackets() bool
HasDownErrorsPackets returns a boolean if a field has been set.
GetDownPackets
func (o *ApWiredUplinkInfo) GetDownPackets() int64
GetDownPackets returns the DownPackets field if non-nil, zero value otherwise.
GetDownPacketsOk
func (o *ApWiredUplinkInfo) GetDownPacketsOk() (*int64, bool)
GetDownPacketsOk returns a tuple with the DownPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetDownPackets
func (o *ApWiredUplinkInfo) SetDownPackets(v int64)
SetDownPackets sets DownPackets field to given value.
HasDownPackets
func (o *ApWiredUplinkInfo) HasDownPackets() bool
HasDownPackets returns a boolean if a field has been set.
GetDuplex
func (o *ApWiredUplinkInfo) GetDuplex() int32
GetDuplex returns the Duplex field if non-nil, zero value otherwise.
GetDuplexOk
func (o *ApWiredUplinkInfo) GetDuplexOk() (*int32, bool)
GetDuplexOk returns a tuple with the Duplex field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetDuplex
func (o *ApWiredUplinkInfo) SetDuplex(v int32)
SetDuplex sets Duplex field to given value.
HasDuplex
func (o *ApWiredUplinkInfo) HasDuplex() bool
HasDuplex returns a boolean if a field has been set.
GetIp
func (o *ApWiredUplinkInfo) GetIp() string
GetIp returns the Ip field if non-nil, zero value otherwise.
GetIpOk
func (o *ApWiredUplinkInfo) GetIpOk() (*string, bool)
GetIpOk returns a tuple with the Ip field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetIp
func (o *ApWiredUplinkInfo) SetIp(v string)
SetIp sets Ip field to given value.
HasIp
func (o *ApWiredUplinkInfo) HasIp() bool
HasIp returns a boolean if a field has been set.
GetLinkSpeed
func (o *ApWiredUplinkInfo) GetLinkSpeed() int32
GetLinkSpeed returns the LinkSpeed field if non-nil, zero value otherwise.
GetLinkSpeedOk
func (o *ApWiredUplinkInfo) GetLinkSpeedOk() (*int32, bool)
GetLinkSpeedOk returns a tuple with the LinkSpeed field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetLinkSpeed
func (o *ApWiredUplinkInfo) SetLinkSpeed(v int32)
SetLinkSpeed sets LinkSpeed field to given value.
HasLinkSpeed
func (o *ApWiredUplinkInfo) HasLinkSpeed() bool
HasLinkSpeed returns a boolean if a field has been set.
GetLinkStatus
func (o *ApWiredUplinkInfo) GetLinkStatus() int32
GetLinkStatus returns the LinkStatus field if non-nil, zero value otherwise.
GetLinkStatusOk
func (o *ApWiredUplinkInfo) GetLinkStatusOk() (*int32, bool)
GetLinkStatusOk returns a tuple with the LinkStatus field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetLinkStatus
func (o *ApWiredUplinkInfo) SetLinkStatus(v int32)
SetLinkStatus sets LinkStatus field to given value.
HasLinkStatus
func (o *ApWiredUplinkInfo) HasLinkStatus() bool
HasLinkStatus returns a boolean if a field has been set.
GetModel
func (o *ApWiredUplinkInfo) GetModel() string
GetModel returns the Model field if non-nil, zero value otherwise.
GetModelOk
func (o *ApWiredUplinkInfo) GetModelOk() (*string, bool)
GetModelOk returns a tuple with the Model field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetModel
func (o *ApWiredUplinkInfo) SetModel(v string)
SetModel sets Model field to given value.
HasModel
func (o *ApWiredUplinkInfo) HasModel() bool
HasModel returns a boolean if a field has been set.
GetModelVersion
func (o *ApWiredUplinkInfo) GetModelVersion() string
GetModelVersion returns the ModelVersion field if non-nil, zero value otherwise.
GetModelVersionOk
func (o *ApWiredUplinkInfo) GetModelVersionOk() (*string, bool)
GetModelVersionOk returns a tuple with the ModelVersion field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetModelVersion
func (o *ApWiredUplinkInfo) SetModelVersion(v string)
SetModelVersion sets ModelVersion field to given value.
HasModelVersion
func (o *ApWiredUplinkInfo) HasModelVersion() bool
HasModelVersion returns a boolean if a field has been set.
GetName
func (o *ApWiredUplinkInfo) GetName() string
GetName returns the Name field if non-nil, zero value otherwise.
GetNameOk
func (o *ApWiredUplinkInfo) GetNameOk() (*string, bool)
GetNameOk returns a tuple with the Name field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetName
func (o *ApWiredUplinkInfo) SetName(v string)
SetName sets Name field to given value.
HasName
func (o *ApWiredUplinkInfo) HasName() bool
HasName returns a boolean if a field has been set.
GetPort
func (o *ApWiredUplinkInfo) GetPort() string
GetPort returns the Port field if non-nil, zero value otherwise.
GetPortOk
func (o *ApWiredUplinkInfo) GetPortOk() (*string, bool)
GetPortOk returns a tuple with the Port field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetPort
func (o *ApWiredUplinkInfo) SetPort(v string)
SetPort sets Port field to given value.
HasPort
func (o *ApWiredUplinkInfo) HasPort() bool
HasPort returns a boolean if a field has been set.
GetPortType
func (o *ApWiredUplinkInfo) GetPortType() int32
GetPortType returns the PortType field if non-nil, zero value otherwise.
GetPortTypeOk
func (o *ApWiredUplinkInfo) GetPortTypeOk() (*int32, bool)
GetPortTypeOk returns a tuple with the PortType field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetPortType
func (o *ApWiredUplinkInfo) SetPortType(v int32)
SetPortType sets PortType field to given value.
HasPortType
func (o *ApWiredUplinkInfo) HasPortType() bool
HasPortType returns a boolean if a field has been set.
GetRate
func (o *ApWiredUplinkInfo) GetRate() string
GetRate returns the Rate field if non-nil, zero value otherwise.
GetRateOk
func (o *ApWiredUplinkInfo) GetRateOk() (*string, bool)
GetRateOk returns a tuple with the Rate field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetRate
func (o *ApWiredUplinkInfo) SetRate(v string)
SetRate sets Rate field to given value.
HasRate
func (o *ApWiredUplinkInfo) HasRate() bool
HasRate returns a boolean if a field has been set.
GetRxPower
func (o *ApWiredUplinkInfo) GetRxPower() float64
GetRxPower returns the RxPower field if non-nil, zero value otherwise.
GetRxPowerOk
func (o *ApWiredUplinkInfo) GetRxPowerOk() (*float64, bool)
GetRxPowerOk returns a tuple with the RxPower field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetRxPower
func (o *ApWiredUplinkInfo) SetRxPower(v float64)
SetRxPower sets RxPower field to given value.
HasRxPower
func (o *ApWiredUplinkInfo) HasRxPower() bool
HasRxPower returns a boolean if a field has been set.
GetStackId
func (o *ApWiredUplinkInfo) GetStackId() string
GetStackId returns the StackId field if non-nil, zero value otherwise.
GetStackIdOk
func (o *ApWiredUplinkInfo) GetStackIdOk() (*string, bool)
GetStackIdOk returns a tuple with the StackId field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetStackId
func (o *ApWiredUplinkInfo) SetStackId(v string)
SetStackId sets StackId field to given value.
HasStackId
func (o *ApWiredUplinkInfo) HasStackId() bool
HasStackId returns a boolean if a field has been set.
GetTemp
func (o *ApWiredUplinkInfo) GetTemp() float64
GetTemp returns the Temp field if non-nil, zero value otherwise.
GetTempOk
func (o *ApWiredUplinkInfo) GetTempOk() (*float64, bool)
GetTempOk returns a tuple with the Temp field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetTemp
func (o *ApWiredUplinkInfo) SetTemp(v float64)
SetTemp sets Temp field to given value.
HasTemp
func (o *ApWiredUplinkInfo) HasTemp() bool
HasTemp returns a boolean if a field has been set.
GetTxPower
func (o *ApWiredUplinkInfo) GetTxPower() float64
GetTxPower returns the TxPower field if non-nil, zero value otherwise.
GetTxPowerOk
func (o *ApWiredUplinkInfo) GetTxPowerOk() (*float64, bool)
GetTxPowerOk returns a tuple with the TxPower field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetTxPower
func (o *ApWiredUplinkInfo) SetTxPower(v float64)
SetTxPower sets TxPower field to given value.
HasTxPower
func (o *ApWiredUplinkInfo) HasTxPower() bool
HasTxPower returns a boolean if a field has been set.
GetType
func (o *ApWiredUplinkInfo) GetType() string
GetType returns the Type field if non-nil, zero value otherwise.
GetTypeOk
func (o *ApWiredUplinkInfo) GetTypeOk() (*string, bool)
GetTypeOk returns a tuple with the Type field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetType
func (o *ApWiredUplinkInfo) SetType(v string)
SetType sets Type field to given value.
HasType
func (o *ApWiredUplinkInfo) HasType() bool
HasType returns a boolean if a field has been set.
GetUpBytes
func (o *ApWiredUplinkInfo) GetUpBytes() int64
GetUpBytes returns the UpBytes field if non-nil, zero value otherwise.
GetUpBytesOk
func (o *ApWiredUplinkInfo) GetUpBytesOk() (*int64, bool)
GetUpBytesOk returns a tuple with the UpBytes field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUpBytes
func (o *ApWiredUplinkInfo) SetUpBytes(v int64)
SetUpBytes sets UpBytes field to given value.
HasUpBytes
func (o *ApWiredUplinkInfo) HasUpBytes() bool
HasUpBytes returns a boolean if a field has been set.
GetUpDropPackets
func (o *ApWiredUplinkInfo) GetUpDropPackets() int64
GetUpDropPackets returns the UpDropPackets field if non-nil, zero value otherwise.
GetUpDropPacketsOk
func (o *ApWiredUplinkInfo) GetUpDropPacketsOk() (*int64, bool)
GetUpDropPacketsOk returns a tuple with the UpDropPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUpDropPackets
func (o *ApWiredUplinkInfo) SetUpDropPackets(v int64)
SetUpDropPackets sets UpDropPackets field to given value.
HasUpDropPackets
func (o *ApWiredUplinkInfo) HasUpDropPackets() bool
HasUpDropPackets returns a boolean if a field has been set.
GetUpErrorsPackets
func (o *ApWiredUplinkInfo) GetUpErrorsPackets() int64
GetUpErrorsPackets returns the UpErrorsPackets field if non-nil, zero value otherwise.
GetUpErrorsPacketsOk
func (o *ApWiredUplinkInfo) GetUpErrorsPacketsOk() (*int64, bool)
GetUpErrorsPacketsOk returns a tuple with the UpErrorsPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUpErrorsPackets
func (o *ApWiredUplinkInfo) SetUpErrorsPackets(v int64)
SetUpErrorsPackets sets UpErrorsPackets field to given value.
HasUpErrorsPackets
func (o *ApWiredUplinkInfo) HasUpErrorsPackets() bool
HasUpErrorsPackets returns a boolean if a field has been set.
GetUpPackets
func (o *ApWiredUplinkInfo) GetUpPackets() int64
GetUpPackets returns the UpPackets field if non-nil, zero value otherwise.
GetUpPacketsOk
func (o *ApWiredUplinkInfo) GetUpPacketsOk() (*int64, bool)
GetUpPacketsOk returns a tuple with the UpPackets field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUpPackets
func (o *ApWiredUplinkInfo) SetUpPackets(v int64)
SetUpPackets sets UpPackets field to given value.
HasUpPackets
func (o *ApWiredUplinkInfo) HasUpPackets() bool
HasUpPackets returns a boolean if a field has been set.
GetUplinkMac
func (o *ApWiredUplinkInfo) GetUplinkMac() string
GetUplinkMac returns the UplinkMac field if non-nil, zero value otherwise.
GetUplinkMacOk
func (o *ApWiredUplinkInfo) GetUplinkMacOk() (*string, bool)
GetUplinkMacOk returns a tuple with the UplinkMac field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUplinkMac
func (o *ApWiredUplinkInfo) SetUplinkMac(v string)
SetUplinkMac sets UplinkMac field to given value.
HasUplinkMac
func (o *ApWiredUplinkInfo) HasUplinkMac() bool
HasUplinkMac returns a boolean if a field has been set.
GetUplinkPort
func (o *ApWiredUplinkInfo) GetUplinkPort() string
GetUplinkPort returns the UplinkPort field if non-nil, zero value otherwise.
GetUplinkPortOk
func (o *ApWiredUplinkInfo) GetUplinkPortOk() (*string, bool)
GetUplinkPortOk returns a tuple with the UplinkPort field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetUplinkPort
func (o *ApWiredUplinkInfo) SetUplinkPort(v string)
SetUplinkPort sets UplinkPort field to given value.
HasUplinkPort
func (o *ApWiredUplinkInfo) HasUplinkPort() bool
HasUplinkPort returns a boolean if a field has been set.
GetVoltage
func (o *ApWiredUplinkInfo) GetVoltage() float64
GetVoltage returns the Voltage field if non-nil, zero value otherwise.
GetVoltageOk
func (o *ApWiredUplinkInfo) GetVoltageOk() (*float64, bool)
GetVoltageOk returns a tuple with the Voltage field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
SetVoltage
func (o *ApWiredUplinkInfo) SetVoltage(v float64)
SetVoltage sets Voltage field to given value.
HasVoltage
func (o *ApWiredUplinkInfo) HasVoltage() bool
HasVoltage returns a boolean if a field has been set.